This School Bus Was Repurposed Into the Ultimate Hay Mover—And It Runs in Reverse

This School Bus Was Repurposed Into the Ultimate Hay Mover—And It Runs in Reverse

There are a lot of fantastic tools out there, and I’m convinced some of the best are those you build yourself. If you have a super specific job to do, it’s not a bad idea to forge or fabricate an arsenal of super specialized equipment to get it done. I feel like Dallas Henry would agree, as he has done it time and again—perhaps most notably with a 25-year-old school bus that now operates as a hay loader.

It’s a 2001 International 3800 with a venerable DT466 diesel engine. And while that compression-ignition lump is still under the hood, it isn’t at the front of the loader bus; it’s at the back. That’s because Henry flipped its orientation around so that the ring gear is on the opposite side of the pinion gear, reversing the drive direction. The Allison automatic and auxiliary transmission retain all of their forward gears; the machine simply drives the other way.

“If all tie rods and steering components are right, it works real good,” Henry told me. “Top speed was 36 mph. I recently put a newer rear end that accepts the hub pilot wheels. The gear ratio is a little lower. Haven’t had it on the road to tell. I usually haul it at distances.”

In the field is where this rig really shines. The front-end loader is an Art’s Way 5000 unit built in the late ’60s or early ’70s, originally intended for articulated 4×4 tractors. Henry fabbed it to fit the bus instead, and now he has a machine that will lift as much as 9,000 pounds—more hay than he could realistically skewer with the forks. The hydraulics run off a 22-gallon-per-minute direct-drive gear pump, and the steering is hydrostatic, running off the original power steering pump.

While the loading process might sound crude, seeing as Henry has to hit the hay bales at 8.5 mph to skewer them thoroughly, he can also operate the loader bus with some stellar finesse. “I never slide the entire bale on the ground. Just the tip of the very end,” he writes. “I hardly ever break a bale. If I do, it already has issues.”

The International’s factory 8,500-pound steer axle springs are gone, and in their place, Henry installed some 12,000-pounders. He also replaced the “rear” 18,000-pound springs as well with new ones, although they’re rated at the same capacity. The tires are 16.00R20s mounted on custom rims.

Henry said the biggest job he ever worked with the loader bus was hauling 30,000 bales of leftover corn stalks, leaves, and cobs. He had to line them all up in rows, clearing the way for more farming and making it easier for semis to get to them. The largest field on that farm was 433 acres. You can believe that this homemade contraption speeds things up considerably.

It might never haul kids to school again, but I imagine it’ll make some great memories for any kids who see it in action. Some of my most noteworthy experiences as a kiddo involved riding around in my dad’s equipment. This would surely do the trick, too.

Henry sent this photo and told me, “I moved a building across town this morning. My wife asked what trailer I was using. I said, ‘I’m just going to pick it up and drive it over there.’” You do what you can with what you’ve got! Dallas Henry

Got a tip or question for the author? Contact them directly: [email protected]

The post This School Bus Was Repurposed Into the Ultimate Hay Mover—And It Runs in Reverse appeared first on The Drive.